Sorry I haven’t posted for a while. I badly
sprained my right thumb and have been unable to type until today (and it’s
still a bit slow-going).
Quite a bit has happened in the past two
weeks. Mick’s unit settled and we’ve been busy bees researching taps, tiles,
vanities and kitchen products.
We’re edging closer to a finalised kitchen
plan but it’s been a tough one balancing price with quality and practicality
with form. We’ve said no to soft-close (It’s
$2.5k we can’t justify), integrated bins (we’ll install our own after hand-over),
and a few other bibs and bobs we can’t see the value for us in adding. We’ve
said yes to under cabinet lights (just one either side of the cooktop), 10
additional drawers (…and counting!), aluminium finger-pull handles, wine rack, and
(my favourite) a book shelf. Jury is still out on getting 4cm caesarstone
(instead of 2cm), extending the stone splashback behind the rangehood, pull-out
pantry set and gloss cabinets vs matt. I will keep you posted!
Bathrooms have been another area that is
requiring some hard decisions mostly due to cost (why doesn’t money grow on
trees or things cost less..? Wishful thinking I know). Anyway, we’ve decided on
a vanity for the main bathroom (we would have it for the powder room also as it
does come in a 900, but it’s more than we want to spend there and unfortunately it
doesn’t come in a 1500 or we’d have it for the ensuite):
This little unit we’ve chosen for the
Powder Room...
...as it looks good in person and feels great to use. Some models have
clunky hardware. I’m not a fan of the soft-close used on vanities as it seems
to make the drawers harder to open (sort of “sticky”), and that’s even the
expensive, Australian-made models I’ve tried.
We’re still undecided about our Ensuite
vanity. There’s less choice in the 1500 size than others and a large price
difference. We’ve made some enquiries about some so I guess we’ll see how much
they are and how they look/feel in person.
Tapware has been another fiddly one. Especially
given I want to “mix and match” pieces, which seems to perplex everyone. I see
why people like sticking to a range but I don’t like things too “matchy-matchy”
and have yet to find a range that satisfies exactly what we want from our bathroomware,
as lovely as most of them are, we do have some strict practicalities which
limit us. So, our choices so far:
Vanity taps:
Powder Room and Main Bathroom Shower Rail:
Ensuite Twin Shower Rail:
Wall mixer for showers and bath:
We're also after a 'waterfall' tap for the bath (model TBA) and heated towel rail for the ensuite. The kitchen and laundry taps are likely to be a gooseneck side-mounted mixer (model TBA). We'll also be finalising the number and placement of towel rails, robe hooks, hand-towel rails etc.
Also, remember the saga of the lights?
Well, I’ve managed to find a place in China who will customise the lights we
like for a fraction of the cost. They have a great Ebay rep and seem to be the
factory that makes a lot of the lights sold at commercial lighting stores. As much as I don’t like to do the Australian
businessman out of money, sometimes you have to look out for number one and the
savings offered by this company are too good to pass up. They can also
customise the lights so they will work with our ceiling and everything else we're purchasing is bought locally and usually even made in Australia.
Here are some of our choices:
One each for the formal lounge and dining...though we can't decide whether to get black or white:
I love this light. We will be getting one for the Master Bedroom and one for the upstairs TV Room:
We will put this beautiful, crystal light in the stairwell. Mick worked out the total drop required and the manufacturer will adjust the string lengths accordingly. They can also change the number of lights in it, though they assure me that our height (1.8m from memory) will suit the full 24.
And last but not least, the kitchen pendants:
I could not find what I wanted (for a reasonable price) anywhere. These gems are a nice compromise (I hope!). They will be light and reflective and should hopefully 'disappear' in the space, which is what I wanted. Especially given their proximity to the skylights and downlights, I hope they look nice and shiny. The manufacturer will add extra cord length so that they can sit at the right height from the raked ceiling.
The rest of our internal lights will be modern-looking fluoro's bought locally. Outdoor lights will likely be purchased through Masters or Bunnings, but we'll cross that bridge when we come to it.
Posts
Loving your light choices!
ReplyDeleteThanks DreamBuild! They were (as with a lot of things) an unexpected tough decision. So many little things go into building a house and even more effort is required when making it a 'home.' But there's been a slight update on the lights, which I hope to detail in the next post, I've managed to find the exact pendant I'm after for the kitchen island! I've sent away for further details so hopefully it all comes together.
ReplyDeleteThanks for stopping by :)